Neale's Weekly Gun Rant Volume 40
Sorry about the font mix-up, but I can't seem to fix it!!
Joining Ruger in their boycott of California sales, Smith and Wesson announces they will no longer sell their handguns in Ca due to the ridiculous "microstamping" requirement. Link .
On January 22nd renowned gun maker Smith & Wesson joined Sturm, Ruger, & Co., by announcing it would cease California sales of its semi-automatic pistols due to microstamping requirements that went into effect last year.
Ruger made the same announcement earlier this month.
Microstamping is a requirement that each firearm be fitted with a special firing pin that leaves a fingerprint on a bullet casing which differs from the fingerprint of every other firearm. In other words--every one of the wildly popular Smith & Wesson M&P .45 semi-automatic handguns would have to be manufactured in such a way so that no two of them left the same mark on a shell casing.
The cost of doing this would be incredibly high to manufacturers, and would be a cost they would have to pass on to consumers in higher prices.
Moreover, the result of doing this would be yet another gun registry--every gun sold that met microstamping requirements would have be to registered so that the government knew who owned the gun that left that fingerprint.
I hope they stick with it and refuse to sell to LEOs, as well! Fuck Kaleeforneeeyah!
My (hopefully soon-to-be-ex) state of New York has gone the next step. Link . Effective January 15, all sellers of ammunition will have to be registered with the state. And as soon as the database is set up, all ammunition sales will require a federal background check.
If you buy ammunition in New York State, you may soon need to undergo a background check.
The New York Safe Act will require retail sellers to do background checks and record sales once a state database is established and operational.
The state database is currently under construction. Last week, a federal judge in Buffalo upheld the New York SAFE Act, but did throw out the provision that limits magazines to seven rounds.
"You will not be able to purchase ammo and have it shipped to your home anymore. It will have to be shipped to a Federal Firearms Dealer. We have to record the sale and do, according to this letter we just received, a background check every time you purchase ammo," said Chuck Sherwood, owner of Timber Creek Sportsman Shop.
As of January 15th, all sellers of ammunition must register with the state. Also, all ammunition transfers in New York must take place in person, including internet sales and they must be facilitated by a New York state ammunition seller.
This crap has GOT to be stopped!
You have GOT to listen to this jackass to be able to believe it!! Link .. Note- "Ghost gun" is a new Victim Disarmament Gang term for a gun with no serial number or made using a 3D printer. Next, just listen to his mash-up of gun terms and outright blatant lies. Just for starts- he claims the gun fires a thirty round magazine (NOT that he gets the terms for magazine and rounds correct) in half a second. That's faster than a Vulcan Minigun. An Uzi, with one of the fastest cyclic rates around, can hit 800 rounds per minute if tuned properly, can fire 6.67 rounds in half a second. To meet Mr. Idiot's claims, the "assault style weapon" he is holding would require a cyclic rate of 3600 rounds per minute- which ONLY the Vulcan Minigun can reach, and it needs 6 barrels, an electric motor to spin them, and, Predator to the contrary, is NOT man-portable. Ennyhoo, listen to Mr. Idiot, an be prepared to laugh. Then start crying- because we actually LOSE battles to jackasses like him!
I watched the video. Link . I cannot, for the life of me, see ANY justifiable reason to shoot a man on his stomach in the floor. it is a cold blooded murder by a cop. And I bet there are surveillance cameras in the area that had a better view that will back that up........IF they haven't been erased already.
Missouri is working to nullify federal gun laws. and that's a GOOD thing! Link .
Like last year's version, the legislation would also allow designated school personnel to carry concealed weapons in buildings. Another provision would let holders of concealed gun permits carry firearms openly, even in municipalities with ordinances banning open carry. It would also lower the minimum age to get a concealed weapons permit to 19, down from 21.
But Nieves' bill is less specific about which federal laws it seeks to nullify. It removes references the 1934 and 1968 gun control acts while keeping generic references to fees, registration and tracking policies that "have a chilling effect on the purchase or ownership" of guns and ammunition by law-abiding citizens.
DAMN!!! This guy makes a LOT of sense! Link . Watch this andbring some sense in the world. DON'T be the gazelle after de-horning!
But Nieves' bill is less specific about which federal laws it seeks to nullify. It removes references the 1934 and 1968 gun control acts while keeping generic references to fees, registration and tracking policies that "have a chilling effect on the purchase or ownership" of guns and ammunition by law-abiding citizens.
DAMN!!! This guy makes a LOT of sense! Link . Watch this andbring some sense in the world. DON'T be the gazelle after de-horning!
From Mama Liberty. Link . True stories of armed defense.
The evening was advancing much too quickly for me and I regretted
staying in the city so long, then was dismayed to find that I was
running low on fuel. I pulled into an old station in a small town just
east of Custer, South Dakota, ran my credit card and started the pump.
There were no other cars in the lot, and only a single clerk in the
mini-mart.
Scanning the area, as always, I noticed a man come from behind the
building and start to walk toward me. Continuing the scan, I saw another
man coming toward me from the opposite direction. He seemed to be trying
hard not to look at me, but failed badly. I was immediately on full
alert and turned my head to see the other person. He was now within my
20 foot "danger zone" and maintaining eye contact as well. I put up my
hand flat out with a command to stop. He just laughed and said, "Give me
some money, lady."
The evening was advancing much too quickly for me and I regretted
staying in the city so long, then was dismayed to find that I was
running low on fuel. I pulled into an old station in a small town just
east of Custer, South Dakota, ran my credit card and started the pump.
There were no other cars in the lot, and only a single clerk in the
mini-mart.
Scanning the area, as always, I noticed a man come from behind the
building and start to walk toward me. Continuing the scan, I saw another
man coming toward me from the opposite direction. He seemed to be trying
hard not to look at me, but failed badly. I was immediately on full
alert and turned my head to see the other person. He was now within my
20 foot "danger zone" and maintaining eye contact as well. I put up my
hand flat out with a command to stop. He just laughed and said, "Give me
some money, lady."
Read on to see what happened next........
Methinks this rant be done, Gentle Reader. Until next time.............

Now how the HELL did that become blue AND in Italics??? Dunnow, but don't bitch to me, I don't care!! LOL
That sometimes happens to me when I put up a picture and try to resume typing directly under it. It might do the same thing with a link. I found that, if I hit the Enter key a second time and double space below the picture, the script returns to normal. I don't know if you would be able to double space below the first link and have the blue part go back to normal, though. You might have to copy the blue part and then delete that section. Then double space below the link and paste the blue part back in, returning it to normal. Once the script is written below the double space, putting the cursor at the beginning and hitting the backspace key puts it into the normal position and doesn't bring back the blue stuff. Seems a lot of trouble to go to, though, for an article that's already been published. Might be something to try if it starts to happen again.
Thanks for the advice. NEXT time, I'll try it!
Ordered the press. Signed up to re-learn from a good friend.
mike, you'll have to get a reloaders manual , they usually cost around 30 bucks or so , cheaper if you look in flea markets or yard sales . the older ones are still reasonably good . in them you will find the different "recipes" for the different powders
personally I have 3-4 different ones spanning about 50 yrs a couple printed by lyman that belonged to my dad , and a couple from speer I use them to cross reference usually to see what the load data has changed over the years.
if you look you can find some on line as well.
another thing youll want to look into is casting your own projectiles and what will be needed to make them work now adays , as for the rest , the government taught me where to look to find how to make my own primers and powders in emergencies , but that's neither here nor there at the moment and not really nessisary for now.
I haven't bought store bought ammo except for 22LR for almost 30 yrs now and im still shooting brass made in the 40s and 50s.
LOL yep, youll want to look at a couple factors dependant on use and how detailed you want to get.
Ill outline my steps here.
first I take my fired cases and tumble them to clean them , I use corn cob mdie afirst that knocks most of the fired powder residue out and semi cleans up the brass, I next tumble the brass in a walnut shell media that smooths out the cases as well as cleans it a bit more , some just use one or the other , but I use both .
next I inspect the cases , I look for cracks , look at the primer pockets for wear , I measure and trim the cases to specs ( I have a book where I keep all the data for each of my guns since they all vary even if they are the same cal.
you would think im ready to load right? nope im not . I then take the projectiles and weigh each one individually and I use half grain incriments , those underweight , those overweight and those dead on and I put them in separate containers. reason for this is I have data for my guns so I know if a projectile is over/under by so much I can adjust how much powder to use so that it wont matter in the end all the bullets are made to end up ( within my skill level ) at the same point of aim irregardless, so they are basically tailor made so to say.
ok next step I make sure the powders all come from the same makers lot , this does have an effect on how the powder preforms , and it can even vary some within the same lot , I do the same thing for the primers , I make sure they are all the same lot.
Ok now im ready to get sown to the actual job of reloading , I have a powder thrower , and a couple different scales , the thrower is set to throw a specific amount of powder charge , I usually try and go a little lite , I then have a trickler , I take the thrown lite charge place it on the scale , and the trickler drops single grains of powder into the charge . ull notice some times the thrower doesn't exactly throw what you want , that's usually due to the properties of the powder used and the conditions your reloading in.
that done the powder is funneled into the preprimed case( did I mention I put a primer in the case?) that's another prestep best done on its own, you can inspect them as you do them for fit , depth and whatever.
Now here is where I do 2 steps at once , I funnel the powder into the case , and place apreselected projectile in the case mouth ans immediately seat it ( I don't like leaving open cases of powder in the holders, too many times I've "bumped " something and cases and powder went flying . making a godawful messand having to restart. and it doesn't stop there .
nrxt the loaded ammo goes in its own case , with all the information printed ona temp label, information such as powder charge , projectile weight , powder and primer makes and lots .
thuis can get as labor intensive as one wants to make it or it can be as simple as one wants to make it , there are times I skip some steps . like when im making simple plinking ammo I wont go into the exacting weighing of the projectiles( I do have a bucket of cast off, those are projectiles that made it through the process but are not in spec for some of the uses I do tsome are as much as 5 grains over or under weight, so all they are really good for is plinking and having some fun.
Each person has to decide how detailed they want to get, my hunting rounds or what I call hunting rounds , I want to shoot inside a 3 inch circle @300 yards and I want each and every one to do the exact same thing as the one before it , that way if there is amiss, if I eliminate everything humanly possabl;e on the mechanical side , the only thing left , is the human side , so the miss has to be human error, meaning , it was me , not the ammo or the gun.
so yes each cal can use different powders at different weights and even for different bullet weights, if one type of powder isn't available chances are , there is another powder that might be available that can be used for that cal and bullet weight( that's why I also have the different books spanning the years ).
I don't hunt much (varmints actually after my livestock is all I kill). Any ammo I load is for combat practice or plinking. And I NEVER carry with re-loads, and won't, for prosecutorial reasons, until there is NO factory defense ammo available. So, what I intend to do is get a good progressive set-up, and experiment until my plinking load equals my defense load for accuracy and reliability, and record my recipe. I'll do this for .45 acp, .40 S&W, 9mm, and .357 mag. I'll add dies as I add firearms in different calibers (aiming towards .45 Colt, .410, and maybe .44 mag.
And that's why I stockpile ammunition.
Mike,
Remember that most of the steps Mark uses are for long range hunting rounds or competition target rounds. For more informal shooting, you can eliminate about three quarters of the steps and still achieve consistency and reasonable accuracy. Mark uses all of these methods because the typical hunting shot where he hunts is at very long range. If I expect to be shooting at game at such ranges, I too use all of those methods (and it's good to know them, if needed). For most of my shooting, however, the standard I aim at is to hit a 9" paper plate at whatever range I'm shooting. That represents the heart/lung area of a deer (or a human). If you can hit that, you can usually make a clean kill. That level of accuracy does not require all of the steps Mark has outlined. A lower level of accuracy, consistent with safety, is usually acceptable, and requires far fewer steps. The reason I'm bringing this up is that the thing that scares people off from reloading is that it seems to be very technical and demanding. It can be, if you are looking for the ultimate in accuracy, but it doesn't have to be to fire the round safely with a lower accuracy level. While achieving a very high level of accuracy can be a good goal for those so inclined, making the gun go bang every time you pull the trigger with a reasonable level of accuracy demands only that you are mechanically inclined enough to operate simple machinery. You'll get to the more complex parts later and will find that they can be a lot of fun to work with. Basic reloading, however, is a fairly simple process, that anyone can do.
I agree, TTGA. That's why I want a simple progressive. I'm not a tack driver, I'm a life defender. I just haven't reloaded in years, and need someone to help me polish off the rust.
Once I buy my press, I'll give you a shout. Thanks for the offer!
Always love those Bill Whittle videos!
Do not take one step back on gun control resistance!!!
Do not compromise on anything!!!
No matter what anyone who has been fooled into thinking they care one thing about crime reduction or how many deceitful methods are used by the anti-gun crowd to show us how we really need to pass legislation against guns they have one objective and that is to rid this country of guns owned by law abiding citizens.
So true.
As to that cop shooting , the cop got 2 years for that ... not much time .