╌>

Neale's Weekly Gun Rant Volume 4

  

Category:  News & Politics

Via:  neale-osborn  •  13 years ago  •  19 comments

Neale's Weekly Gun Rant Volume 4

It's nice to see a la-who za-her finally getting back into the limelight. Jim Carrey, the formerly funny man, has decided that somehow, his former fame grants his opinions on victim disarmament more relevance, and must therefore be aired without anyone saying anything derogatory about those opinions. What he has actually done, with a pathetic rant on "Funny or Die", is that in addition to showing he doesn't know what the Constitution is about, he proves he is no longer funny. Then, to make matters worse for himself, he attacked FOX news for pointing out his stupidity (and taking a pot shot at his former fame). The pathetic has-been, most recently seen on film as a Chris Angel/David Blaine magician (and doing a bad job of it, I might add) might just want to shut his mouth on politics, work on his flexibility, and try to get a role doing what he used to do best- physical humor. Besides, Canadians have no say in American politics.

Mexican Vigilantes are sick of Mexican police working hand in hand with criminals. As is common with the narcotraficantes, police in a Mexican town apparently decided "If you can't arrest'em, work for'em"! Vigilantes took over the town, arrested the police, and apparently searched homes for evidence of wrongdoing on the polices' part. Some claim the vigilantes are the criminals, some claim it's the police who are guilty. I wonder where THIS will wind up?

Dateline: Nelson, Georgia- Following on the footsteps of Atlanta suburb Kennesaw, The small city of Nelson, Georgia has passed, 5-0, an ordinance requiring the head of each household to obtain a gun and ammunition. They exempt felons and the mentally ill, and allow anyone to opt out. There are no penalties for failing to comply. One of the reasons for doing this is, apparently, as a hedge against federal confiscation. If you are required by law to own a gun and ammo, they cannot then confiscate them. Again, I do not support forcing anyone to excercise their rights, 2nd Amendment or otherwise. But I like the idea of making it a good idea. " The law requires the head of every household to own a gun and ammo to provide for the emergency management of the city and provide for and protect the safety, security and general welfare of the city and its inhabitants. " That would almost fit one of the definitions of a "well regulated militia". All they need to add would be monthly training days in the town square (or the local shooting range). Personally, I favor the irregular half of the entire militia definition of 1792. Go HERE to read the entire 2nd Amendment and the definitions of the terms in the language of the day.

Well, Connecticut done went and did it! They passed a "comprehensive new gun control law", designed specifically to violate the Constitution's 2nd Amendment in as many ways as possible. Again, knee-jerk sentimentality trumps intelligent thought. Somehow, making a murderer (who probably will not obey magazine size limits anyway) take an extra 1-2 seconds to switch out a magazine would have saved lives. Yeah, right!

On a lighter note, Larry Thomas, known as the "Soup Nazi" during the heyday of that pathetic show "Seinfeld", is feeling put upon. And, while I despised the show AND the character, I'm kinda on his side. Serbu Firearms has put his face on a shirt , proclaiming "No Serbu For You". You see, they didn't ask him permission to use his likeness. So I can support him on that. But his reason? "I have seen my face on T-shirts, random objects on eBay in the past," he said, "but politically this is the most offensive thing I have seen involving me as the Soup Nazi. I am an advocate of gun control." So, it's no surprise that a man touting himself as a "Soup Nazi" espouses the Nazi ideal of a disarmed society. Thus, while I support his right to not have his face used for commercial purposes, well, I like the whole concept. Though the slogan SHOULD say "No Serbu For You, New York".

Now, Washington begins the process of assuming total control of law enforcement, nationwide. They have started with Colorado , supporting Hickenpooper, the Democrat asswipe Colorado has gifted itself with, in his attempt to pass legislation that will grant the US SS police powers to arrest elected sheriffs who refuse to enforce unConstitutional gun laws, whether state or federally enacted.

Obama lies again- He tried to claim that gun control laws do not violate gun owners' rights. At the same time, while proclaiming he supports the RTKBA, he ALSO praises Connecticut's "toughest gun laws in the country" as "The closest thing to what he is pushing Congress for" according to ABC Radio News. Adding over 100 additional weapons to the banned weapons list for Connecticut, banning ALL magazines with a capacity over 10 rounds, forcing resgistration of ALL existing magazines over 10 rounds, and requiring background check for ALL sales, private AND commercial, of any firearm. Of course, according to the marxist in the White House, none of this violates our 2nd Amendment rights. And there is no reason for conflict over this. It is time, and in fact past time, for America's citizens to start filing lawsuits against the states AND the federal government when they violate our rights. We are being incrementally stripped of rights, and allowing assholes like Obama, Feinstein, Reid, and every other gun control (victim disarmament) person in America. We need to loudly proclaim the lies the liberal left keeps proclaiming about gun ownership, the 2nd Amendment, and their unConstitutional violations of that Amendment. And we need to stockpile the necessary things we need to protect and excercise our rights. Yes, I said it.

My thanks to L. Neil Smith, Libertarian, science fiction author, and prolific writer on all topics related to personal rights and freedoms, for passing this one on. I won't say much about it except that ya gotta read it to truly grasp the stupidity of this woman. So here's the link . And it's true- Colorado DOES have a LOT to apologize for. Not the least is for electing this woman. But perhaps worse is RE-electing this woman. And worst is being one of the three states (with New York and Connrcticut) to suck on Obama's gun-control teat. Way to destroy everything Colorado ever meant to the cause of individual freedoms and liberties.

IN what appears to be an attempt to blame a gun dealer rather than the killer for the killer's actions, the BATFE revoked the license of a Connecticut gun shop to deal in firearms. The shop, which sold the mother of the person (he would like me to mention his name) who committed the Newton attack a Bushmaster Rifle, possibly the one he used in the attack. The federal Constitution Violation Bureau (BATFE) has declined to say why they revoked the license. Most likely, the shop (which they raided in the days following the shooting spree) had paperwork errors. Having held an FFL, I know how easy it can be to make a simple error on the myriad forms the state and federal agencies force down the business owner's throat.

Any reviews on speedloaders for the Taurus Model 605 (5 shot .357 mag polymer framed snubbie)? I'm leaning towards the HKS, but I always liked Safariland products. And does anyone wish to sell a compact .45 acp Colt Officer's ACP (or a decent clone) 1911? I need one for carry purposes and to experiment on.

Well, that's a wrap for this rant. See ya next week!


Tags

jrDiscussion - desc
[]
 
Neale Osborn
Freshman Silent
link   seeder  Neale Osborn    13 years ago

Don't like my rants? Don't read'em.

 
 
 
Chucky Stuart
Freshman Silent
link   Chucky Stuart    13 years ago

7.62x39, it is still every wear and affordible.

But going up fast Badfish. A spam can on Cheaperthandirt now goes for $450. Locally I can still find it for 8 bucks for a box of 20, but that's still high compared to days gone by. The good news is that I picked up the trifecta (SKS, AK, Mini-30) for less than most folks pay for 1 AR-15.

 
 
 
Neale Osborn
Freshman Silent
link   seeder  Neale Osborn    13 years ago

When the time comes, it will be all over the place, just laying on the ground.

That's the reason why I'm contemplating a 9mm despite my displeasure of the cartridge! I just located a Rock Island Armory 9mm 1911 clone in the compact format- about the size of a Colt Officer's ACP.

 
 
 
Neale Osborn
Freshman Silent
link   seeder  Neale Osborn    13 years ago

CHeaper than Dirt has HKS speed;oaders for $7.69 a piece. I', gonna have tp buy one and see whether I like it.

 
 
 
Neale Osborn
Freshman Silent
link   seeder  Neale Osborn    13 years ago

I do not currently own any .40 s&w. I DO, however, have over 400 rounds of free 9mm Speer lawman hp. If I was buying for personal desires, it would be .45acp or .40 smith. But there aren't any available around here. At least, not in a 1911 format. But I havethat nice little Rock Island available. But I don't know Rock Island well enough to go for it.

 
 
 
TTGA
Professor Silent
link   TTGA    13 years ago

Neale,

Rock Island was a Federal Arsenal, so that's where the frame was made. Since all those were made for the military in .45ACP, that one has been reworked to 9MM. If the rework job was well done, it should be a good piece.

HKS speedloaders are about as good as any I've ever tried. They're all I now use for my Model 19 and I've never had one fail to operate properly. More importantly, since they require a knurled knob to be turned to release the cartridges, I've never had one spill the rounds loose in my pocket. I have had this happen with the loaders using a pushbutton release (which are a couple of seconds faster on the reload). I figure that practice can make the HKS almost as fast and I carry the thing a lot more than I use it. One trick is to put your left thumb on one of the notches in the cylinder and your forefinger on one of the cartridges that you are inserting. Bring your finger to your thumb and the cartridge goes into the chamber automatically. With a little practice, you don't even have to look at your hands while reloading. NOTE: This works with six shot revolvers like the S&W's, but may have to be slightly adjusted for others where the notches are offset from the chambers.

 
 
 
Neale Osborn
Freshman Silent
link   seeder  Neale Osborn    13 years ago

Rock Island ARMORY not arsenal. This is a brand new pistol, on the compact frame, captive recoil spring w/guide rod, etc. Feels a little rough, but that's no prob for a 1911 gunsmith. I just wondered about overall quality (they won't let me take it apart at the store to check sear, springs, etc)

Thanks on the HKS- I had one for my own Model 19, waaaaay back when. I just never used them on a 5 shot snubbie. These days, I'm usually a semi-auto guy!

 
 
 
TTGA
Professor Silent
link   TTGA    13 years ago

OK, that one is a company I've never dealt with. Since it's a new piece, they aren't going to let you shoot it before purchase either.

I've been checking (when I've had time) about the replacement sights for my 1911. I'm leaning toward the MGT three dot fixed sight, sold by Brownell's. They have two versions with different sizes for the front sight tenon. One is .075" wide and the other is .125". I checked with the custom shop at Springfield Armory and they told me that they use one that measures .080". May have to get the larger one and fit it with a file. Almost certainly will have to fit the dovetail on the rear sight with a file, but I expected that; they always make that part too large so that it can be fitted precisely.

 
 
 
Neale Osborn
Freshman Silent
link   seeder  Neale Osborn    13 years ago

You are correct. A good sight is ALWAYS oversized in the dovetail and the tenon (the post into the cut out)

 
 
 
TTGA
Professor Silent
link   TTGA    13 years ago

Very true. The last thing I want is to fire the piece and hear the front sight go whizzing past my ear. Although that model of the rear sight has a set screw, I hate depending on screws to hold sights in place. Too easy for them to loosen and throw things out of alignment.

 
 
 
Mark in Wyoming
Professor Silent
link   Mark in Wyoming     13 years ago

7055_discussions.jpg?width=721 neale , TTGA , rock island armoury is made in the Philipines, they are USGI and CNC made pieces that are well made ( I have owned 2 and still own one as my carry) for the price i paid for the one i kept it is a very worthwhile firearm and well made . the fit and finish is excellent though i did do a little "Tweeking" along personal preference , i polished the rails with 3X steel wool , polished the feed ramp with jewelers rouge , and added an aftermarket full length Guide rod to my fullsized GI mdl. 25 yrd s 3 shot gtoups are 2.5 inches dependant on rounds used largest spread has been 4 inches . definitely in my opinion well worth the money initially spent ( in my case i got my GI mdl when the price was $230). being USGI it accepts just about any and all the aftermarket acsessories i have looked into . I also have the cenier conversion kit to shoot 22 lr off the same frame , a very fun gun to shoot either in 45 , or the 22 lr.

 
 
 
Neale Osborn
Freshman Silent
link   seeder  Neale Osborn    13 years ago

Mark- my norinco often wears a colt .22lr top end for the same reasons.

As to the rest of your post, THANK YOU!!!! I'm not a fan od 9mm, but I have over 450 rounds, so I need a gun to shoot them in. Being a 1911 fanatic (and a damn good gunsmith) I have no reason to worry about a little polishing and fine-tuning. NO gun goes on my waist until it's eaten a few hundred rounds and had a trigger job and throating and ramping.

 
 
 
Mark in Wyoming
Professor Silent
link   Mark in Wyoming     13 years ago

Neale , I didnt really HAVE to do the rail polishing , most new 1911s usually have about a 500 round break-in period , but i was bored , and wanted to hurry the process along a little , the big difference though was the Wolff full length guide rod , i would also recommend a set of springs to further tailor to needs , the factory spring ( though within specs ) was a bit heavy , a slightly lighter spring with the new rod , brought the groups in to very acceptable compliances for my uses .

A friend of mine got a little torqued off though , my little $230 dollar 45 shoots as well if not better than his high dollar Kimber .

 
 
 
Neale Osborn
Freshman Silent
link   seeder  Neale Osborn    13 years ago

"Shooting in" a 1911 is always fun, but with the ammo shortages these days, I, too, would polish the rails. But I strip the frame to the bare bones, then just put the frame and slide together with Jeweler's lapping compound in the rails, then hand-run the slide a few dozen times. Clean, oil, and repeat with jeweler's rouge a few times. Soon (like 3-4 minutes) you will have mirror-polished rails and grooves. A touch of cold-bluing to protect, and Voila! And the best part is, the gun looks untouched. Steel wool tends to leave signs of the work done. Rouge plus the cold bluing doesn't.

 
 
 
Neale Osborn
Freshman Silent
link   seeder  Neale Osborn    13 years ago

Well said, Bruce. VERY well said.

 
 
 
Neale Osborn
Freshman Silent
link   seeder  Neale Osborn    13 years ago

I happen to agree. It is hte same reason I sometimes wish the Democrat leaders would jump the shark and go straight to socialism. it sure as shit would wake up the real people.

 
 
 
Neale Osborn
Freshman Silent
link   seeder  Neale Osborn    13 years ago

I do a complete trigger job on every 1911 I get. Stoning all machine marks from all surfaces, polishing all springs (you'd be amazed what just polishing springs can do) and smoothing the trigger, sear, and hammer contact points. Shooting in is more expensive these days than it used to be,

FYI- the poor man's trigger job for 1911s is as follows. Remove the magazine, and empty the chamber. if desired, place a fired shell in the chamber as a snap cap. Cock the gun. Placing your thumb firmly against the hammer, push firmly forward as if you are going to push the hammer into the fired position. While pushing firmly, dry fire the gun. Re-cock, and repeat. After doing this a few dozen times, you will notice the trigger getting smoother. It won't make it a crisp trigger, but it will smooth it out and lighten the pull.

 
 
 
Neale Osborn
Freshman Silent
link   seeder  Neale Osborn    13 years ago

Hi back atcha!!

 
 
 
Neale Osborn
Freshman Silent
link   seeder  Neale Osborn    13 years ago

I do the same basic thing myself.

 
 

Who is online






111 visitors