Lighter cars and airplanes could be on the horizon thanks to an advance in the manufacture of steel. Researchers have found a way to strengthen the metal and reduce its densityand without increasing costs.
The advance might translate to an extra 1 mile per gallon (2 liters per kilometer) in gas mileage for a standard car, estimates materials scientist Alan Russell of Iowa State University in Ames, who was not involved with the work. Thats not enough to make drivers jump for joy at the gas pump, but its really quite a substantial achievement, he says.
Producing strong, lightweight materials is a delicate balancing act. Lighter materials tend to be weaker, and stronger materials tend to be more brittle. Glass, for example, is strong but brittle: You can try to bend or stretch it with your hands and it wont budge, but drop it on the floor and it shatters.
One method of making steel lighter is to add aluminum, a less dense metal. In steel, aluminum forms an ultrastrong compound with iron. That strength is an asset, but the compound tends to arrange into brittle bands. To disperse the aluminum compound and make the metal less brittle, researchers led by materials scientist Hansoo Kim of Pohang University of Science and Technology in South Korea added nickel, which caused the aluminum compound to permeate the metal in nanometer-sized clusters instead of long bands. The clusters are too small to cause the undesirable brittleness, but the strength and lightness of the aluminum remain , the researchers report online today in Nature . The researchers examined their steel with an electron microscope to confirm that the aluminum clusters had formed. Then they tested the metal by applying tension and found that it was stronger and less brittle than conventional steel.
The new steel is an interesting and novel development that stands a good chance of eventually being adopted by industry, says metallurgist P. Chris Pistorius of Carnegie Mellon University in Pittsburgh, Pennsylvania. But its not a dramatic leap forward, he says. This is a very significant increment, but it does build on what we know about how steels work.
Where the new metal really shines is in its cost. Other lightweight, strong metals such as titanium alloys are too expensive to be used in passenger vehicles. The low price of the metals used to produce the new steel means that the price will be closer to that of standard steel, Russell says, so automakers could use it to lighten their loads without driving up costs. Thats the kind of thing that makes engineers salivate freely, Russell says. They love that kind of improvement.
http://news.sciencemag.org/chemistry/2015/02/new-lightweight-steel-cheap-yet-strong

Can large scale manufacturing of this new alloy breath new life in to long dormant American steel plants?
Please say yes!
I count 4 elements in this alloy which need to be mixed at the right proportions : Fe , C , Al , Ni . This sounds promising if they can get the manufacturing done cheaply .
Is your background in metallurgy, chemistry Petey?
Aluma Steel, would seem like an appropriate brand name.
It's not that they haven't mixed these metals together before. The real issue they have resolved is in getting the Aluminum to not arrange itself in layers. Arranging it in layers creates fault lines in the metal.
It's got to be more than just adding Nickle, they have been adding Nickle to Steel for many decades the same as Chromium. Chromium adds an antioxidant property to steel and Nickle adds malleability to it while untempered (easier to forge) and case hardens real easy. Adding Aluminum to the mix has been a desirable mix for over 70 years.
It has to be in the process of mixing, the order in which they mix the disparate metals and the quantities.
If they can replicate this on a large production scale, it goes two ways, Lighter steel but also hope for stronger aluminum. Which would be a real boon to the aircraft industry.
The dormant/lethargic steel industry in this country is more a result of economics that ability.
Believe me they are not thinking about production here, just profitability to manufacture it elsewhere.
Probably South Korea, or even India.
FLY
I grew up in the vicinity of the Wheeling-Pittsburgh steel mills and the one key point in the article that jumps out at child of the steel industry if you will, is
The steel mills are in terrible shape from an structural standpoint and the steel mills are all coal fired plants (in part or totally) and not having been updated in years would be stymied by strict EPA regulations in attempts to retool.
A Catch-22 if you will.
Some of the mills are still making steel - a lot of bars and sheets are hauled out of state to NY, Michigan, Indiana and even Canada in addition to being used by the automobile industry in Ohio.
Good article
Wow! What a neat idea!
I hope it works! Maybe our steel industry could make a comeback!
This would touch every sector of our economy if we were to decide to produce this stuff here!
Aviation, automotive, home appliances, energy production, construction....... The list is endless.
FLY
Broader production of U.S. steel would certainly invigorate many areas of the U.S, economy.
Up in the areas along the Indiana, Illinois border, I know that they are still keeping coking ovens hot (but idled) simply because if you turn them off, you lose the entire operation. They have been idled for better than a couple of decades now.
It would just be wonderful if we could get steel production here in the states worth being invested in. That would be an example of "Trickle Down Economics" that worked!!!
FLY
No way the old coking ovens and other aspects of coal fired steel mills will be able to exist under the new rules of engagement with the environment and no one (yet) sees a return on investment that is timely enough to completely revamp the mill infrastructures and power sources (if the current grid of non fossil fuel power would support it)
More questions than answers about this right now
Crap! We both know this country needs a bottom up supply of good wage/middle-class jobs.
No argument with your point, but that changes nothing about the fact that the ROI is not plain enough or timely enough at this point to drive the amount of infrastructure investment that is necessary for this change to happen quickly.
That is not crap - that is fact!
No one is talking about trickle down anything here - it is more about how the rebuilding of the steel industry infrastructure is rationalized and accomplished within the constraints of expanding limitations on the industry