╌>

Missouri Plans to Build Solar Panels into Road Along Old Route 66

  

Category:  News & Politics

Via:  jerry-verlinger  •  10 years ago  •  16 comments

Missouri Plans to Build Solar Panels into Road Along Old Route 66

  by  

One of the most famous roads from America's past could help set the stage for the highway of the future, at least if a project launched by the Missouri Department of Transportation pans out.

MoDOT, as its locally known, plans to become the first public highway department to test out a new type of pavement that not only replaces conventional concrete and asphalt but that also can generate electricity through built-in solar panels. The technology was developed by an Idaho-based start-up called Solar Roadways.

"If the solar roadway concept proves to be feasible, it creates electricity and could be the first road in history to ever pay for itself," said Tom Blair, the team leader on Missouri's Road to Tomorrow initiative, which was created two years ago to find ways to increase the state's investment in its roadway infrastructure without raising taxes.

Read More: Getting Their Modern-Day Kicks on Old Route 66

Solar Roadways, founded by husband-and-wife entrepreneurs Julie and Scott Brusaw, has developed a hexagonal block of about 4.4 square feet made of tempered glass that is strong enough, they claim, to stand up to even the heaviest truck traffic. The glass blocks have a mu, or traction, similar to that of conventional asphalt.

But they each contain solar cells capable of generating up to 44 watts of current, "entirely dependent on the sunshine they receive," explained Julie Brusaw by e-mail.

The blocks also have built-in LED lights that can display lane markings bright enough to be seen in daylight — and which can be reprogrammed if there's a need to shift lanes, for example. The electric current can be diverted into the grid or power heating elements that, during the winter, would minimize snow and ice accumulation.

While final details are still in the works, MoDOT plans to have the first Solar Roadway blocks in place "before the first snow falls this year," said project leader Blair. Initially, the glass pavement will be used to replace most of the sidewalks at the Route 66 Welcome Center and Museum in Conway, Missouri. It's located where the original Mother Road, as the highway was known, has been supplanted by Interstate-44.


             Photo Courtesy of Solar Roadways / Photo Courtesy of Solar Roadways

The energy the blocks create will be used to supplement power the center now gets off the grid, a process that will let MoDOT "directly measure what the payback would be in the real world," said Blair.

The next step will be to use the Solar Roadway blocks to replace the pavement at the welcome center and perhaps install them on a stretch of historic Route 66 nearby, added Blair, noting that rather than tapping the state's already over-stretched highway budget, the goal will be to apply for grants and seek additional funds through crowdsourcing.

The Brusaw's have used a similar approach to fund the development of the solar pavement, with the company receiving a series of grants from the U.S. Department of Transportation while also raising several million more through crowdsourcing.

The initial deployment at the Route 66 Welcome Center will cost about $100,000, according to Blair. The Brusaws declined to discuss the actual cost of each block, with Julie cautioning in her e-mail that, "This is just a pilot project, so mass production is not being used yet. If all goes well with the pilots, we hope to gear up for it in the next few months."

That could sharply drive down the cost, though the solar road blocks would still cost more than conventional concrete or asphalt. But the Road to Tomorrow initiative has concluded that if the technology works as promised, it would not only generate money by being wired into the grid, but might also help cut down the costs of highway maintenance. If the blocks can melt snow and ice, said Blair, they'd need to be plowed and salted less often, for one thing.

The MoDOT project is just one of several pilot programs Solar Roadways hopes to participate in. It expects to soon install some of its blocks on public roads near the company's headquarters in Sandpoint, Idaho. And it is working on deals, the founders say.

Noting that there are about 29,000 square miles of paved roads in the U.S., Scott Brusaw said he believes a significant chunk of the nation's growing energy demands could eventually be generated by switching to solar blocks. For those good at math, there are about 27.8 million square feet per square mile of road, equal to 6.32 million of the blocks.

At 44 watts, one square mile would be able to generate a maximum of about 278 megawatts — at least, theoretically. By comparison, U.S. nuclear plants produce anywhere from 479 megawatts to 3.8 gigawatts of power over a 24-hour period, according to the Energy Information Administration.

[ Link to original article ]


Tags

jrDiscussion - desc
[]
 
Jerry Verlinger
Freshman Silent
link   seeder  Jerry Verlinger    10 years ago

In June 2014 I seeded an article; 

Future Roadways To Be Paved With Lighted Heated Solar Panels?

 This is a follow-up story showing they are actually going to lay these tiles down on a standard highway to see if they are really going to work as planned.

The original story gathered a lot of skepticism, as should have been expected, now we will find out how the panels hold up under actual highway use. 

 

 

 
 
 
Kavika
Professor Expert
link   Kavika     10 years ago

Great idea, let's hope that it works as promised.

 

 
 
 
Hal A. Lujah
Professor Participates
link   Hal A. Lujah    10 years ago

And if the roadway is curved?  What about the crown of the road?  The geometry of these panels is pretty useless, not to mention wasteful, since the edge of the road would not be straight.  As a civil engineer, I can think of at least a dozen reasons why this design will not be functional.  Roadway design requires way more geometric flexibility than these can provide, not to mention the fact that water and electricity are not a good combination.  These may find some sort of limited application in uncomplicated parking lots and sidewalks, but I don't see them ever being useful for roadways.

 
 
 
Jerry Verlinger
Freshman Silent
link   seeder  Jerry Verlinger  replied to  Hal A. Lujah   10 years ago

And if the roadway is curved?  What about the crown of the road?  The geometry of these panels is pretty useless, not to mention wasteful, since the edge of the road would not be straight.  

As civil engineer you should be aware that a curve is a series of straight lines. Anyway, the panels will not be used to the very edge of the road making it possible for the shoulder to create the curve.

The road crown and the geometry of the panels has been considered in the design. This system has been under a series of test for years, this is the first time it is actually being placed down as a working road system.

I'm sure the  engineers have taken all the obvious and not so obvious potential flaws into consideration before making the decision to lay down this section of highway with these panels.

As in all seeming radical designs systems, the only way to find out if it will work as planned, is to try it and see what happens.

 
 
 
Buzz of the Orient
Professor Expert
link   Buzz of the Orient    10 years ago

Will they be less slippery than asphalt or concrete when wet?

 
 
 
Jerry Verlinger
Freshman Silent
link   seeder  Jerry Verlinger  replied to  Buzz of the Orient   10 years ago

Will they be less slippery than asphalt or concrete when wet?

The panels have been in the test mode for years. The surface is textured to match a newly laid asphalt roadway, so traction should not be a problem. 

For more information go to this link for the article I posted about Solar Roadways in June 2014. There are links to a video and other articles that will fill you in about all of these logical questions. 

 
 
 
Dowser
Sophomore Silent
link   Dowser    10 years ago

Let's put a few overloaded coal trucks on them, like we have in KY, and see what happens...

I hope this works the way they want them to-- at the least, they will have some real data to work with.  And, I assume, that they will modify the design as necessary...  This could be a great idea, or it could be a fiasco-- we'll just have to wait and see and hope for the best!

 
 
 
Randy
Sophomore Quiet
link   Randy  replied to  Dowser   10 years ago

If they work we can get rid of all of the coal trucks (and trains) altogether sooner. It has to happen sooner or later and I support sooner.

 
 
 
Jerry Verlinger
Freshman Silent
link   seeder  Jerry Verlinger  replied to  Randy   10 years ago

 

If they work we can get rid of all of the coal trucks (and trains) altogether sooner. It has to happen sooner or later and I support sooner.

I think sooner. I've watched some videos and read a number of articles about this project, and I'm convinced this is going to be the future.

There are a limitless number of things these roads will be able to provide us with in addition to the solar power they will generate.

The next step will be to program the roads to guide vehicles to predetermined destinations with absolutely no help from a driver. Also, the roads will be programmed to make it impossible for vehicles to collide.

Go here for more information provided in my 2014 article.

 
 
 
Dowser
Sophomore Silent
link   Dowser  replied to  Randy   10 years ago

Yay!!!

 
 
 
Cerenkov
Professor Silent
link   Cerenkov    10 years ago

This will never produce any significant fraction of base load. It might have some contribution however.

 
 
 
Dowser
Sophomore Silent
link   Dowser  replied to  Cerenkov   10 years ago

I think, at this point, every little bit helps...  But don't worry-- you won't be out of a job any time soon!!!  winking

 
 
 
Jerry Verlinger
Freshman Silent
link   seeder  Jerry Verlinger  replied to  Cerenkov   10 years ago

 From an article published by Designboom Aug. 7, 2012

The roads are capable of directly inputting energy into the power-grid through photovoltaics, which if realized, could power an entire country from the generated electricity. since our current power grid is based on centralized power stations, and distribution is handled through transmission lines and relay stations, the ‘solar roadways’ would replace coal- and nuclear-powered electricity generation plants by transforming the road into a self-contained energy source.

solar powered roadways by scott brusaw

solar powered roadways by scott brusaw

 
 
 
Spikegary
Junior Quiet
link   Spikegary  replied to  Jerry Verlinger   10 years ago

Great idea, hope it works!

 
 
 
Buzz of the Orient
Professor Expert
link   Buzz of the Orient  replied to  Jerry Verlinger   10 years ago

But the government isn't applying sufficient money to upgrade the present road/bridge infrastructure. Why are bridges collapsing? Do you seriously think they would spend the tremendous amount required to do this?

Even if it's an investment in a clean energy source, the vested interests would nix it.

 
 

Who is online




156 visitors